OPERATION • 200 degree handle pivot • Only requires ten full strokes to reach maximum elevated height of 7.8" (198 mm) • Control handle has three position (raise/neutral/lower) fingertip control • Spring loaded handle returns to upright position automatically • Padded grip handle for comfort
HYDRAULICS • Galvanized hydraulic pump includes an overload relief valve and lowering can be actuated by either hand or foot pedal release
FORKS / CHASSIS • Climber rollers for easy entry into pallets • Exit rollers mounted on hanger bracket reduces wear and allows for easy exiting of pallets • Heavy duty frame constructed of one-piece formed channel • Adjustable push rods allow for adjustment to roller height • Hangers are constructed of cast iron for greater strength and longevity • Easy maintenance—grease fitting and bushings at all pivot points • Frame is powder coat paint
WEIGHT • 650 lb (272 kg) (with battery and charger)
TIRES / WHEELS • DRIVE: 9" x 3" (229 x 76 mm) polyurethane • LOAD: 2.9" x 3.5" (84 x 48 mm) polyurethane
HYDRAULICS • Lift cylinder with chrome-plated rods • Pump unit including motor, solenoid, gear pump, and pressure compensated lowering valve
ELECTRICAL • Electric braking • Quick disconnect EPD power cut off • Battery discharge indicator and key switch
BRAKES • Electromagnetic brake mounted on motor armature shaft, multiplying the braking power through the transmission • Brake is applied when control arm is in the vertical or horizontal position • Neutral braking resists rollback on ramps
OPERATION / CONTROLS • Ergonomic operator handle with travel, lift, and lower functions • Angle grips allow easy operation with either hand • Wrap-around guard • Reversing switch • Thumb control • Key switch and horn • Low mounted tiller arm offers excellent operator comfort and minimum steering effort • Gas-assisted spring tiller handle • Creep speed function with steer handle at 15° back-tilt from vertical
TRANSMISSION • Vertically mounted AC drive motor direct mounted to gear housing • Oil-bathed hypoid bevel gear drivetrain with tapered roller bearings • State-of-the-art optimized gear technology provides minimal envelope circle, zero maintenance, and low noise level
ACCESSIBILITY • Water-resistant • Removal of three piece power head cover exposes major components for inspection and maintenance
CAPACITY • 6000 lb (2727 kg) at 24" (610 mm) load center
BATTERY • Compartment dimensions: 31.1" x 13.1" x 31.6" (790 x 333 x 803 mm) • Min/max battery weight: 975/1500 lb (443/682 kg) • Connector: Anderson 175 Gray – A-11
TIRES / WHEELS • DRIVE: 10" x 4" (254 x 102 mm) polyurethane • STABILITY CASTER WHEELS: (2) 3.9" x 2.5" (99 x 66.5 mm) polyurethane • LOAD: (2) 3.25" x 6.5" (83 x 165 mm) polyurethane
HYDRAULICS • Center mounted lift cylinder • Pump unit including motor, hydraulic reservoir, solenoid, and gear pump • Integral pressure compensated flow control valve regulates lowering speed
ELECTRICAL • 24-Volt programmable ZAPI traction control and matching drive motor provides high performance throughout the entire speed range • Separately fused power control circuits • Quick disconnect EPD power cut off • Hour meter / battery discharge indicator combination gauge • Power configurations and diagnostic features • Travel speed remains constant relative to throttle position
BRAKES • 24-Volt regenerative electromagnetic brake • Brake is applied when control arm is in the vertical or horizontal handle position • Neutral braking resists rollback on ramps
OPERATION / CONTROLS • Large operator platform for increased comfort and productivity • Ergonomic operator handle with travel, lift, and lower functions • Microcellular rubber floor mat for improved operator comfort • Large thumb control lever for forward and reverse travel allows travel as a rider truck or walkie • Angled, one piece power head cover • Smooth urethane high speed grab bar for operator security
TRANSMISSION • Vertically mounted drive motor mounted to gear housing • Oil-bathed hypoid bevel gear drivetrain with tapered roller bearings • State-of-the-art optimized gear technology provides minimal envelope circle, zero maintenance, and low noise level
CASTER SYSTEM • Heavy duty spring loaded, articulating systems designed to stabilize truck performance
FORK ASSEMBLY • Pallet entry slide allows easy pallet entry by lifting the fork up and over bottom board • Eight easily accessed grease zerks for ease of maintenance • Tapered extended fork tip design is available on double pallet handling models
ACCESSIBILITY • Durable composite single piece cover exposes major components for inspection and maintenance
STANDARD EQUIPMENT • Large AC traction motor • Tapered fork tips with entry skid plate • Programmable performance travel / plugging / braking • Ergonomic high speed bar
CAPACITY • 4000 lb (181 kg) at 24" (610 mm) load center
BATTERY • Minimum battery weight: 1090 lb (494 kg) • Compartment dimensions (open): 31.6" x 13.1" (803 x 333 mm) • Connector: Anderson 175 Gray—A-11
SPEED • EMPTY: 0 - 3.4 mph (5.5 kph) • LOADED: 0 - 3.1 mph (5 kph) • LIFT - EMPTY: up to 37 fpm • LIFT - LOADED: up to 32 fpm with 4000 lb (1814 kg) load • LOWERING - EMPTY: up to 29 fpm • LOWERING - LOADED: up to 56 fpm with 4000 lb (1814 kg) load
TIRES / WHEELS • DRIVE: 9" x 3" (228 x 76 mm) polyurethane • DUAL LOAD: (2) 4" x 2.9" (101 x 74 mm) polyurethane
HYDRAULICS • Lift cylinder has hard chrome-plated rods • Pump unit including motor, solenoid, gear pump, and pressure compensated lowering valves
ELECTRICAL • 24-volt ZAPI AC-0 inverter with matching drive motor provides high performance throughout the entire speed range • Separately fused power control circuits • Quick disconnect EPD power cut off • Hour meter / battery discharge indicator combo • Power configurations and diagnostic features are displayed with a ZAPI handheld console • Low battery interrupt • Travel speed remains constant relative to throttle position, regardless of load
BRAKES • Regenerative electromagnetic brake mounted on motor armature shaft, multiplying braking power through the transmission • Brake is applied when control arm is in the vertical or horizontal position • Neutral braking resists rollback on ramps
OPERATION / CONTROLS • Ergonomic operator handle with travel, lift, and lower functions • Angle grips allow easy operation with either hand • Wrap-around guard • Reversing switch • Thumb control • Key switch and horn • Top mounted tiller arm offers excellent operator comfort and minimum steering effort • Gas-assisted spring handle • Creep speed handle control
TRANSMISSION • Vertically mounted drive motor direct mounted to gear housing • Oil-bathed ZF GK10 hypoid bevel gear drivetrain • State-of-the-art optimized gear technology provides minimal envelope circle, zero maintenance, and low noise level
FRAME AND MAST • Bolt-on high-visibility mast, I-beam construction and lift cylinders positioned on outer I-beam for best view through mast • Dual lifting chains • Fixed straddle leg inside dimension (ID) of either 42" or 50" (1067 mm or 1270 mm) • 4" (102 mm) wide straddle legs = ID + 8" (203 mm) • Class II ITA fork carriage with 36" (914 mm) tall load back rest • Forks are adjustable from 8" ID to 31" OD (203 mm to 787 mm)
The J1 Joey Task Support Vehicle is a ready-made solution for customers who need a single truck to perform a broad range of material handling functions.
CAPACITY 1000lbs (454kgs)
LIFT HEIGHTS
86" (2184mm) 126" (3200mm) 162" (4115mm)
PERFORMANCE
AC drive motor can be programmed through the onboard LCD dash, enabling each operator to set speeds according to preference 24V ZAPI travel controller supports simple and precise truck positioning Can carry a combined load of 800lbs (364kgs) at a maximum platform height of 162” and be driven at height from one location to another Travel speed remains constant relative to throttle position regardless of the load Regenerative braking kicks in when the operator releases the travel control or when speeds are reduced Travel speed: 3.41mph (unloaded) and 2.5mph (under load)
ERGONOMICS Responsive ergonomic fingertip controls, which are integrated into the retractable guard rails, include electronic power steering, lift, lower, horn, and customizable speed control
STRUCTURAL INTEGRITY
Hide-away rear work platform Fork size: 42" (1067mm) standard 224 AH battery package (4-6 volt, maintenance-free AGM batteries), complete with automatic 25AMP / 110VAC plug-in internal charger Side gate / foot pedal travel lockout High-visibility I-beam mast