EP Internal Combustion Forklifts- R Series 1.0 - 3.5t
APPEARANCE The latest appearance design method was used to create the R series fluent and aesthetic outline, that matches the latest appearance trend. The large engineering plastic covering enables the whole truck looks friendly and natural.
EFFICIENCY Thanks to the long wheelbase design, the longitudinal stability of whole truck is much better, the hoisting capacity at same lift height are enhanced by an average of 100kg compared with former truck. At the same time, it prolongs work time of rear wheel as the reduced rear axle’s load. The travel speed of truck has been raised, for example, the 2-2.5t type comes to 20km/h. Increasing the hard proportion of hydraulic pipe, adopting right angle connector or straight through connector, that reduce the pressure loss of pipeline, and rise the lifting speed of mast, the speed is increased by an average of 10% compared with former truck. Turning radius and width of right angle stacking aisle are decreased through reducing the dimensions of whole truck, that raise the efficiency of storehouse.
CLEAN The environment friendly engines all meet EU stage-II emission control regulation, the noise emission also comes up to EU standard. The metal hood and molding sound insulation matches environmental protection demands.
SAFE A throttling device is set in pipe system, the mast won’t result in failing control of mast even some pipes broke. By using a built-in hood lock device, the safe level of the truck has been raised.
EP Internal Combustion Forklifts- R Series 4.0 - 5.0t
Advanced Technology for superior all round performance W19A&W14B series forklifts are now equipped with a new 2-stage stator torque converter that help to improve all round work efficiency by providing smoother, fatigue-free operation. Making it unnecessary for the operator to shift from low to high gear(1st → 2nd), the 2-stage stator torque converter is designed to eliminate shift shock. This greatly improves operator comfort especially during long work shifts and reduces the possibility of rocking the pallet when accelerating the forklift. Hydrostatic Power Steering System R series forklifts are equipped with a hydrostatic power steering system that works to reduce steering effort and lessen fatigue over long hours of operation. Completely hydraulic in design with no mechanical linkages, the smooth operation of this system helps to eliminate kickback and oversteer characteristics.
Non-Slip Floor and Step The wide-open step is not only convenient to use but safer thanks to anti-slip mats. To further improve safety in demanding work conditions, the floor board is constructed of embossed steel to reduce of possibility of slipping.
Options
2.0-5.0m duplex mast
2.5-5.0m full free duplex mast
4.3-6.5m triplex mast
Special carriage and backrest
Other dimension forks
Dual drive wheel with fender
Solid tyre
Colored tyre (white/green)
Cabin
Heater and air condition
Fire extinguisher
Semi-suspension seat or full-suspension seat
Dual air cleaner or special air cleaner rear working light
EP Internal Combustion Forklifts- R Series 5.0 - 7.0t
Advanced Technology for superior all round performance W19A&W14B series forklifts are now equipped with a new 2-stage stator torque converter that help to improve all round work efficiency by providing smoother, fatigue-free operation. Making it unnecessary for the operator to shift from low to high gear(1st → 2nd), the 2-stage stator torque converter is designed to eliminate shift shock. This greatly improves operator comfort especially during long work shifts and reduces the possibility of rocking the pallet when accelerating the forklift.
Hydrostatic Power Steering System R series forklifts are equipped with a hydrostatic power steering system that works to reduce steering effort and lessen fatigue over long hours of operation. Completely hydraulic in design with no mechanical linkages, the smooth operation of this system helps to eliminate kickback and oversteer characteristics.
Non-Slip Floor and Step The wide-open step is not only convenient to use but safer thanks to anti-slip mats. To further improve safety in demanding work conditions, the floor board is constructed of embossed steel to reduce of possibility of slipping.
Floating System A superior full floating overhead guard is installed with rubber damping instead of the traditional rigid design. This greatly reduces machine vibration and offers a smoother ride over rough terrain and reduces operator fatigue.
High Quality Tires Industrial tires with a wide footprint giving it greater stability and lift capacity in rough work environments.
High Ground Clearance Offer greater maneuverability and keep the machine moving in the roughest of applications.
Wide-view Mast Wide-view mast provides excellent through the mast visibility improving the work efficiency and allowing safe operation of the forklift
Click to download the pdf brochure: 
