Overview

ARDCO has a growing presence in the geotechnical industry by supporting operators with equipment that provides enhanced speed and productivity on the job site. The K 4x4 platform when combined with ARDCO, or other manufacturer’s, equipment provides a rugged and reliable system for the most demanding geotechnical work. Base specifications for the K 4x4 platform and popular options follow:

ARDCO K 4X4 Standard Buggy

• PAYLOAD: 12,000 lbs.
• GROUND SPEED: 0-20 MPH (32km/h)
• LENGTH: 25’ ( 7.6 meters)
• WIDTH: 8’ ( 2.4 meters)
• HEIGHT: Mast Down (Trucking) 10’ 3” ( 3.1 meters)
• WEIGHT: 13,500 lbs ( 6,123 kg) buggy with bare rear frame
• STEERING: Articulated center pivot steering with hydraulic cylinders
• AXLES: John Deere 1200 Series “Teammate” 55,000 lbs capacity
• ENGINE: Cummins QSB 4.5 Diesel rated at 160 BHP at 2,500 RPM
• TIRES: 23.10 X 26 (R20 tractor tires) 10 ply tires
• CAB: Open ROPS Style
• COLOR: ARDCO Yellow standard

Buggy Options

• ENGINES: Caterpillar and Deutz options available
• WINCH: Ramsey 700 and 800 models 15,000- 20,000 lbs pull
• TIRES: 66 X 43 Super Terra Tires, 66 X 34 Flo Grips
• FUEL TANK: 30 Gallon or 60 Gallon fuel tank
• CAB: Optional 2-3 man open or enclosed cab
• COLOR: Optional Custom Color upon request

ARDCO Model C-1000 Geotechnical Drill

• MAST: 16’ Welded Tubular Steel for use with 10’ (3.1 meter) drill pipe
• ROTARY: ARDCO heavy-duty Top-Head drive rotary assembly, hydraulically driven through 3” ( 7.6 cm) wide straight tooth gears with a 5.923 : 1 gear ratio.
• TORQUE: up to 700 lb. ft (950 nm) speed 300 rpm (optional Torque to 1200 lb. ft. (1628 nm)
• DRAWWORKS: Two Continuous #80 1” (2.5 cm) roller chains actuated though a Ramsey 35X speed reducer. Pull-UP or Pull-Down: 6,000 lbs (2,722 kg). Speed to 100’ (30.5 meters) per minute.
• PIPERACK: Heavy duty pipe storage rack located on right side of drill unit.
• AUXUALLARY LIFT WINCH: Hydraulic cable drum with 150’ (76.2 m) of 7/16” cable driven hydraulically including mast mounted cable pulley and weight
• MUD PUMP OPTIONS: Gardner Denver 4 ˝” X 5” (11.43 cm X 12.70 cm) reciprocating type mud pump; Gardner Denver 5” X 6 “ ( 12.70 cm X 15.2 cm) reciprocating type mud pump; Center Line hydraulic driven model CLM 7.5” X 10” (19.1 cm X 25.4 cm) MSPA Mono Capacity: Continuous 150 gpm (1567 lpm), 0- 200 psi (13.8) bar
• STABILIZERS: Either 2 or 4 hydraulic stabilizers for vehicle / drill leveling
• AIR DRILLING: Buggy mounted air compressors for operating air hammer drilling, water injecting system for air drilling
• EXTRUDER- Hydraulic sample extruder
• HYDRAULIC DROP HAMMER: SPT (Standard Penetration Testing) automatic hydraulic hammer
• CAT HEAD: Optional Hydraulic CAT Head available
• SLIDING BASE: Optional hydraulic sliding drill base.