Kenco Lift Attachments

Barrier Lift

Easy, Efficient, Safe Lifting and Placement of concrete barriers

Barrier Lifts grip concrete block, wall, curb and median wall securely. Just by setting it down onto the wall top activates the lifter. The barrier tongs clamp tightly against the wall surface without need for auxiliary hydraulic hookups. Swiveling pad angles adjust to match the slope of the wall. The wall is held firmly in the device as it is moved and positioned. Once the wall has been set firmly back on the ground, it will release automatically. This action continues with each cycle.

Features:
• Rugged, built-to-last construction
• Excellent wearéabrasion performance
• Superior gripping power
• Full surface contact without scratching or damaging concrete

Useful for a wide variety of tasks:
• Road construction
• Curbing
• Sound wall
• Landscaping and retention block
• Cemetery operations and much more

FULLY AUTOMATIC OPERATION SEQUENCE

1. Lifter is positioned in place above the wall

2. Operator lowers lifter, fully collapsing the unit onto the wall

3. Operator raises the lifter, gripping the wall automatically.

4. Operator places wall at destination and collapses the lifter and it release

Pipe Lift

The easiest and most efficient way to move heavy pipe

An actuator uses the power of gravity to allow the scissor action of our pipe lifter to clamp securely on PVC, iron, or concrete pipe. If you have ever tried to move pipe using straps or teacups, the Pipe Lift attachment will make a significant impact in overall productivity. The operator is able to use these tongs to grab, lift, and move pipe without assistance. Double your production output versus the sling and chain methods. The Pipe Lift’s unique, wide scissor-grip design permits a secure lift – even when the pipe is not centered. The machine operator simply sets the tongs down onto the pipe and the legs automatically grab on tightly. They won’t release until the pipe has been set back down firmly into position.

Features:
• The heavier the pipe, the tighter and stronger the grip
• Narrow profile of the pipe tongs eases removal from tight
trenches
• Unique design allows for lifting a wide range of pipe sizes
with each model
• No additional hydraulics are required

FULLY AUTOMATIC OPERATION SEQUENCE

1. Lifter is latched in open position, ready to lower onto load.

2. Operator rests lifter on load, which causes actuator to release.

3. Operator raises hook, causing lifter to grip automatically.

4. Load is moved to destination and lowered. The operator again rests the lifter on the load, which causes the actuator to automatically latch.

Pipe Hook

SLIDE BALANCE OR SELF-LEVELING PIPE HOOK MODELS

The Pipe Hook was developed specifically for the utility contractor to provide a safe, efficient pipe handling attachment. The slide balance models use an adjustable lifting eye to obtain the preferred balance point. Self-leveling models have a built-in cylinder that automatically adjusts to the weight of the pipe to achieve the proper balance point. The Pipe Hook can be used on any shape or type of 8 foot pipe sections. Custom sizes can also be fabricated for pipe up to 20 feet in length.

LIFT… MOVE…PLACE…SET… IN ONE CONTINUOUS MOTION WITH OUR ORIGINAL SERIES PIPE HOOK

The Pipe Hook is designed with a unique slide mechanism that allows the operator to pick the balance point for various loads. It can be used on ANY shape or type of 8 foot pipe section. These Kenco Pipe Hook models are available in capacities ranging from 9000 to 30,000 pounds, and larger custom sizes can be built upon request.

SELF LEVELING PIPE HOOK

The only self leveler in the industry, this exclusive balancing mechanism is housed inside the hook body. The operator simply slides the hook fully into the pipe, then lifts and moves it to the destination. The weight of the pipe automatically levels itself. Self-leveling models are available up to 9000 pound capacities. The self-leveling mechanism is housed inside the body of the hook. Like the manual slide models, the self leveling pipe hooks can be used on ANY shape or type of pipe.

Superlift

THE ONLY LIFTER IN THE INDUSTRY WITH REMOVEABLE TINES

Engineered with an exclusive Keystone design, the legs are interchangeable. Now, one lifter can be transformed from a block lifter to a pipe handler, from a log lifter to a clam shell bucket. The main body of the Superlift houses the actuator and operates with a scissor action. It needs no additional hydraulic lines to operate and hooks up with just a shackle rigging

Move wall, pipe, blocks, drums, debris, and more with the Superlift’s assortment of tines. This unique tool has been designed to integrate versatility into a single attachment so that it could be used to handle a wide range of different shapes and sizes of objects.

Instead of purchasing an individual lifter for different job applications, this one device has tines that can be easily changed from one set to another. Custom tines can also be designed by our engineering team for job specific needs.

The main body of the Superlift is purchased separately from the tines, so you can add on to your arsenal of attachments as needed.

The Superlift comes in standard models with capacities of 6000 and 12000 pounds. Larger custom sizes are available.

Triple Tine

Three points of contact will handle those odd and irregular shaped objects such as rock and field stone. No additional hydraulics are necessary to put this attachment into operation

Never before has there been a safer and easier way to move large rocks than with the Kenco Rocklift. The Rocklift is a triple tine mechanical grapple and each model offers a wide grip range and capacity relative to the rock size being moved.

The Rocklift is fully automatic, which gives the operator complete control when it is to grip or release the load. The three serrated tines contacting the load allows for a very stable lift cycle even on irregular objects. Since the Rocklift is completely mechanical, there are no wires or hoses to maintain or damage.

Once the operator lowers the rock into place, the center tube can be lowered to engage the actuator regardless if the tines are clear. Once this actuation occurs, the operator can begin lifting the Rocklift, and as the tines become free it will slide back to the default open position to allow for next lift cycle. The Rocklift also excels at picking up brush and debris, especially in hard to reach places such as deep ditches or ravines.

The Rocklift is an extremely versatile attachment that allows contractors the ability to make easy work out of otherwise difficult tasks.

The Rocklift is available in models to handle capacities from 3000 to 12,000 pounds, with custom models also available. Height restrictions may apply.

Contact us for more information: salesinquiry@capitalindustrial.ca