Raniero

The AC120-6 and AC140-6 Forklifts were developed for handling 12,000 and 14,000 kg loads in short corridors and for a long duration.

Main characteristics:
- Reliability guaranteed by particularly robust frames and masts, studied for moving heavy and bulky loads.
- High performance thanks to a 96V and 120V battery tension.
- Using AC Technology (ALTERNATING CURRENT) to manage the traction motor 38kW (96V)/48kW (120V)
and the lifting pump motor 45kW (120V)/50kW (120V), improving performance, autonomy and longevity of battery life.
- Simple, efficient operator-forklift interaction and a rapid and precise response to every single activated command.
- Zero emissions and low noise levels.
- Recovery of energy during deceleration or the reverse direction phase.
- External mast chains and a high visibility cabin allow the operator to manoeuvre the forklift in surrounding areas promoting a safe workplace.
- A safe and ergonomic entry into the cabin with an optimal drivers seat position.
- The seat by GRAMMER provides high comfort to the driver
- With the dynamic steering system, steering control is agile and precise.
- Quick and safe direction change with Devio Command or a double pedal.
- Fork carriage PYN-TYPE, 3 hydraulic ways with piping plus 4th, 5th, 6th and more, make the forklift more versatile for using equipment in different operating environments indoor/outdoor.

Sectors: paper, cotton, steel and aluminium, wood, logistic, recycling, empting containers.

The AC series from 15 to 18 tons represents since 2009 a revolution in handling heavy loads in short corridors,
long working autonomy and difficult climatic conditions

Main characteristics:
• The electronic management AC, batteries 96V o 120V voltage, allow this forklift series equal performance to those of internal combustion of similar range.
• AC technology offers a long list of advantages for the forklift driver. Rapid and precise response to every single activated command.
• No vibration emissions on handling loads benefiting safety in the workplace during the lifting, tilt or shifting.
• No impetuous movement typical of diesel engines in driving phases.
• Energy saving each engine- traction 45kW (120V), lifting pump 55kW (120V), steering- is activated individually when required.
• Operator- forklift interaction regarding movements, diagnostic of anomalies and in the management of working parameters.
• Easing the steering and greater driving precision. Quick and safe direction change with devio command or bi-pedal.
• Recovery of energy on deceleration or reversal of the driving direction through the oil bath braking system.
• A well-weighted and robust frame, a reinforced mast provide stability, safety and reliability when handling heavy loads and often bulky.
• Battery positioned on side or rear eases a quick change.
• Comfortable cabin with a 360° and overhead view. Located on a low-height frame, allows the operator to get in and off frequently and in safety.
• Fork carriage PYN-TYPE, 3 hydraulic ways with piping plus 4th, 5th, 6th and more make the forklift more versatile for using equipment in different operating environments, indoor/outdoor. 

Sectors: paper, cotton, steel and aluminium, wood, logistic, recycling.

WHATEVER YOU NEED

A forklift for Narrow Working areas:
the new NW-Narrow Width series

Raniero has developed a new series of 10t to 18t/ 22000 to 40000 lbs forklifts with 1800 mm / 70' width.

This new range is the result of the need expressed by several customers to handle steel coils over 10 tons/ 22000 lbs with an extended load center and in the middle of other coils of storage less than 2 meters.

The range has the following characteristics:

• 10t up to 18t / 22000 to 40000 lbs
• 770mm – 1100 mm  / 30' - 43' load center
• Width: 1800 mm/ 70' only thanks to a reduced axle
• HT- tilting cylinders above the roof
• CO- length without forks reduced from l2= 3680 to 4270 mm

Each model comes with a 96V 1395Ah battery or with a Waterless version to reduce control and maintenance.

The Narrow Width series has been designed with mast and frames capable of handling loads subject to frequent lateral stresses.

For handling coils by the eye, the developed solution is by chamfered forks at the side and with a central open room. This option gives the operator greater visibility when picking up or unloading a single coil on a truck, coil stack or production line.
The choice of an electric forklift allows zeroing the emission and reduce noise pollution inside a warehouse and in a production area. To have a forklift with same performances of a diesel one.